EN

Grind cylindrical roller diameter of 58.5 mm in length

  • RUB
    • RUB
    • USD
    • EUR
i agree with "Terms for Customers"
Sold: 0
Uploaded: 12.09.2013
Content: 30912181754883.rar 24,31 kB

Product description

Grind cylindrical roller diameter of 58.5 mm and length of 800 mm. Material - steel 20, δv = 500 MPa, the roughness of the treated surface - 2.5 microns.
Type of fixing - chuck and the center of the machine model - 1624M.
Turning to perform a finishing pass. It is advisable to use a straight-through plate cutter with hard metal T15K6 the main rake angle γ = 15 °, to the main rear angle α = 12 °, mainly in terms of the angle φ = 60 °.
The calculations indicate:
1. Determine the permissible feeds and speeds.
2. Purpose of the tool life.
3. Determination of the efficiency of the calculation results:
- Calculation of the actual tangential component of cutting force;
- Determination of the actual power consumed for cutting;
- Calculation of the coefficients using the tool for cutting speed and power of the machine;
- Determination of normal time.
4. Analysis of the results of calculation of cutting conditions.

Feedback

0
Period
1 month 3 months 12 months
0 0 0
0 0 0
In order to counter copyright infringement and property rights, we ask you to immediately inform us at support@plati.market the fact of such violations and to provide us with reliable information confirming your copyrights or rights of ownership. Email must contain your contact information (name, phone number, etc.)